Operation method of CNC gantry drilling machine Release time：2021-12-07 12:56:32 Number of views:333

The main function of the chip removal device of CNC gantry drilling machine is to discharge the chips from the processing area outside the CNC gantry drilling machine. The chips on CNC gantry drilling machines and grinding machines are often mixed with cutting fluid. The chip removal device separates the chips from the chip, the CNC gantry drilling machine sends them into the chip collection box (car), and the CNC gantry drilling machine and the cutting fluid are circulated to the cutting fluid tank. For the roughing of the blank, the concern should be how much power of the machine tool, that is, how much the feed speed is once. Because the CNC gantry drilling machine is rough processing of the blank, the accuracy is not high, but the efficiency is very high, so the CNC gantry drilling machine is required to have strong performance and large tool amount. Let's take a look at the operating procedures that operators need to remember before starting operations.

1. Before operation, check whether the handle and button of each part of the gantry rig are normal, fill lubricating oil according to the regulations, and test at low speed for 1 ~ 2 minutes before operation. 2. Wear overalls and hats before work. Do not wear gloves during operation.

3, the clamping workpiece should be stable. The loading and unloading, tool setting, measurement, speed change, spindle tightening and cleaning of the CNC gantry drilling machine should be carried out after the CNC gantry drilling machine is shut down.

4, do not place tools, measuring tools, workpieces and other debris on the workbench.

5. Check whether the mutual position of the workpiece and the milling cutter is correct when starting.

6, CNC gantry drilling machine automatically moves the tool, the handle and thread need to be removed; The workbench can not go to two positions, and the limit block should be installed firmly.

7. When the CNC gantry drilling machine is running, it is forbidden to clean the machine by hand or cotton yarn. One should not stand in the tangent direction of the milling cutter, let alone blow the chips with his mouth.

8. The tool holder, tie rod, chuck and tool should be installed and tightened before starting, and the spindle should not be used to assist loading and unloading.

9. After the CNC gantry drilling machine is used, turn off the power, clean the machine, place the milling head in the vacant position, and move the workbench to the center position.

The correct use of CNC gantry drilling machine can reduce the casualties of the machine to the staff and extend the service life of the milling machine. The normal maintenance of CNC gantry drilling machine can reduce machine failure and improve production efficiency.