How to use CNC gantry drilling machine Release time：2021-12-07 12:56:32 Number of views:401

The main function of the chip removal device of the CNC gantry drilling machine is to discharge the chip from the processing area outside the CNC gantry drilling machine. The chip in the CNC gantry drilling machine and grinder is often mixed with cutting fluid. The chip removal device separates the chip from it, and the CNC gantry drilling machine sends it into the chip collection box (car), and the CNC gantry drilling machine and cutting fluid circulate to the cutting fluid tank. For the rough machining of the blank, we should care about how much power the machine has, that is, how much is the feed speed. Because the CNC gantry drilling machine is the rough machining of the blank, the accuracy is not high, but the efficiency is high, so the CNC gantry drilling machine is required to have strong performance and large knife specific volume. Let's take a look at the operating procedures that the operators need to remember before starting the operation.

 1, before operation, the handles and buttons of various parts of the gantry drilling machine should be checked whether they are normal, and the lubricating oil should be added in accordance with the regulations, and the low speed operation should be 1 to 2 minutes. 2, wear work clothes and hats before work. It is forbidden to wear gloves during operation.

 3, the clamping workpiece should be smooth. The loading and unloading of the CNC gantry drilling machine, the alignment of the knife, the measurement, the transmission, the tightening and cleaning of the spindle should be carried out after the CNC gantry drilling machine is shut down.

 4, it is forbidden to place tools, measuring instruments, workpieces and other sundries on the workbench.

 5, when the machine is turned on, check whether the mutual position of the workpiece and the milling cutter is correct. 6, CNC gantry drilling machine automatically move the tool, the handle and thread disconnection; the worktable can not go two positions, the limit block must be firmly installed.

 7, CNC gantry drilling machine operation, prohibit the use of hand or cotton cleaning machine.Can not stand in the tangential direction of the milling cutter, let alone blow chip with the mouth.

 8, the tool carrier, tie rod, chuck, cutting tool installation and tightening before starting, the spindle shall not be used for auxiliary loading and unloading.

 9, CNC gantry drilling machine after use, turn off the power, clean the machine, the milling head in the empty position, the worktable to the center position.

 The correct use of CNC gantry drilling machine can reduce the machine to the staff casualties, prolong the service life of the milling machine.The normal maintenance of CNC gantry drilling machine can reduce the machine failure and improve the production efficiency.